The necessary maintenance and repair schedule for the roof of a recreational vehicle varies depending on the age of the vehicle. Many manufacturers have begun to use rubber or EPDM coated metal roofs, which typically require less maintenance.
Owners of older RVs can do the RV Roof Repair with liquid roof coating themselves to extend the life and reduce the need for future maintenance or repairs. Regular inspection is the first step for any maintenance schedule. You can do the inspection when you are cleaning the roof. Because the roofs are flat, they get dirty pretty quickly unless the vehicle is covered or garaged. Water tends to pull in some areas. When the water dries in the sun, you are basically left with a puddle of dirt.
Debris and dirt can etch into the roofing material, eventually causing rust. Rust leads to holes and leaks. Holes can be difficult to repair. So, the first preventative maintenance step is to keep the roof clean. You can sweep away the debris or use a power washer. Caution should be taken to avoid falling. Even with the best cleaning schedule, rust sometimes happens. Cracks can form in the sealant, even if an EPDM coating was applied. Resealing may be necessary.
The first steps for rv roof repair is resealing or applying an EPDM coating are usually the same. The roof needs to be thoroughly cleaned and dried with soap and water. Old coatings may need to be scraped off if they are cracked or curling. Rusty spots need to be sanded until they are smooth. Metal patches may need to be soldered on to repair holes.